設為首頁
加入收藏
聯系我們
- heidenhain海德漢RCN8380 667590-01/02/21 667596-01/11/21圓光柵維修
- Heidenhain海德漢RCN2380編碼器667785-01和667785-02圓光柵故障維修方法
- 瑞士阿奇夏米爾加工中心光柵尺GF電火花電子尺故障維修方法
- 銑床光柵尺電子尺數顯表影響的因素
- 成都綿陽德陽哪里有維修海德漢HEIDENHAIN編碼器圓光柵光柵尺數控系統的公司
- 武漢十堰襄陽哪里有維修海德漢HEIDENHAIN編碼器圓光柵光柵尺數控系統的公司
- 株洲長沙衡陽哪里有維修海德漢HEIDENHAIN編碼器圓光柵光柵尺數控系統的公司
- ACCRETECH/東京精密操作盒故障及其解決方法
- ACCRETECH/東京精密三坐標測量儀故障維修方法
- ACCRETECH/東京精密三次元維修流程
HEIDENHAIN海德漢長度計價格及維修的詳細資料：
HEIDENHAIN海德漢長度計價格及維修主要對HEIDENHAIN-ACANTO長度計、HEIDENHAIN-CERTO長度計、HEIDENHAIN-METRO長度計、HEIDENHAIN-SPECTO長度計等海德漢系列長度計的型號、價格、維修、廠家及服務網點等提供24小時服務。：.我們將竭誠為你服務。
選擇海德漢*的長度計的理由。
*
海德漢*的長度計*具有的*還體現它的全量程上。無論是測量10 mm還是100 mm的零件，其實際尺寸的測量*度是*樣的。海德漢*的長度計具有*重復性特點，可用于比較測量，例如用于大批量生產。
測量范圍大
海德漢*的長度計測量范圍有12 mm、25 mm、30 mm、60 mm或100 mm多種選擇，因此其*臺測量設備可以測量非常不同的零件，避免頻繁地更換價格昂貴的量塊或模板。
堅固耐用
海德漢*的長度計是為工業環境而制造的。它具有始終如*的*和的溫度穩定性。*以，可以廣泛應用于生產設備和機床中。
*、HEIDENHAIN海德漢長度計價格及維修產品的技術參數：
HEIDENHAIN-ACANTO
Absolute measuring method |
|
High degree of protection |
|
Compact size |
|
EnDat 2.2 interface |
|
Properties
| Measuring range | 12 or 30 mm |
| System accuracy | ± 2 µm |
| Plunger actuation | By measured object or pneumatic |
| Protection | By measured object, IP67 Pneumatic, up to IP67 |
| Interface | EnDat 2.2 |
HEIDENHAIN-CERTO
Very high accuracy |
|
Very high repeatability |
|
Zerodur scale |
|
Gauge body made of Invar |
|
Ball-bearing guide |
|
Properties
| Measuring range | 25 or 60 mm |
| System accuracy | ± 0.1 µm With linear error compensation up to ± 0.03 µm |
| Repeatability | CT 2500: < 0.02 µm |
| Short-range accuracy | < 0.03 µm |
| Plunger actuation | By motor or coupling |
| Interface | 11 µAPP |
HEIDENHAIN-METRO
HEIDENHAIN-METRO MT 1200/MT 2500
High accuracy
|
|
High repeatability |
|
Zerodur scale
|
|
Actuation by cable-type lifter |
|
Ball-bearing guide
|
|
Properties
| Measuring range | 12 or 25 mm |
| System accuracy | ± 0.2 µm |
| Repeatability | MT 1200: < 0.03 µm MT 2500: < 0.09 µm |
| Short-range accuracy | MT 1200: < 0.03 µm MT 2500: < 0.04 µm |
| Plunger actuation | By measured object, cable-type lifter or pneumatic |
| Interface | 1 VPP, TTL |
HEIDENHAIN-METRO MT 60/MT 101
High accuracy |
|
High repeatability |
|
Large measuring ranges |
|
Ball-bearing guide |
|
Properties
| Measuring range | 60 or 100 mm |
| System accuracy | ± 0.5 µm |
| Repeatability | MT 60: < 0.06 µm MT 101: < 0.04 µm |
| Plunger actuation | By motor or coupling |
| Interface | 11 µAPP |
HEIDENHAIN-SPECTO
High degree of protection |
|
Compact size |
|
Ball-bearing guide |
|
Sturdy design |
Properties
| Measuring range | 12 or 30 mm |
| System accuracy | ± 1 µm |
| Repeatability | ST 1200: < 0.25 µm ST 3000: < 0.70 µm |
| Short-range accuracy | < 0.03 µm |
| Plunger actuation | By measured object or pneumatic |
| Protection | Up to IP 67 for 12 mm variants with actuation by measured object IP 67 for all other variants |
| Interface | 1 VPP, TTL |
HEIDENHAIN-METRO MT 1281 MW
Measuring delicate parts with virtually zero force
The measurement of delicate parts, such as those in the watchmaking industry, must not lead to their deformation, otherwise the results could be incorrect or the parts could become damaged. The HEIDENHAIN-METRO MT 1281MW length gauge is particularly suited for such demanding measuring tasks. For measurements with a gauging force of nearly 0 (0.01 N to 0.07 N), it includes a specially paired insert with an exchangeable measuring pin. These extremely low values over a measuring range of 12 mm are also possible thanks to the ball-bush guide with very constant friction conditions and the constantly improving measuring force over the course of five million measuring cycles.
The included plunger lifter gives the operator the most direct control possible over the measuring process. As an alternative, a mechanical cable lifter can achieve a very constant gauging motion. The gauging speed is set with a throttle screw in the bellows. The interaction between the guideway, the ZERODUR scale with 2 µm signal period, and the electronics in the connector makes repeatability better than 0.03 µm possible.
The ND 287 evaluation unit is suitable as a subsequent electronics unit for stand-alone measuring stations. When combined with an MT 1281, a measuring step of 1 nm is possible. Also, it offers a color display and many possibilities for capturing and classifying measurement series as well as creating histograms. The ND 287 thus makes it easier to evaluate the manufacturing process.
Highlights
| Gauging force | 0.01 N at measuring position 2 mm |
| Accuracy | ± 0.2 µm over the entire measuring range of 12 mm |
| Repeatability | ≤ 0.03 µm for measuring range of 12 mm |
Products used in this application
| MT 1281 MW with zero gauging force | 359355-10 |
| Recommended accessories: | |
| Cable lifter | 257790-01 |
| Gauge stand, e.g. MS 45 | 202162-02 |
| ND 287 with one measuring channel | 636287-01 |
| Ethernet module for ND 287 | 654019-01 |
| Foot switch (assignment must be adapted) | 681041-xx |
HEIDENHAIN-CERTO CT 6001
Highest accuracy and repeatability between temperatures of 19 °C and 21 °C with a thermally invariable design
With an accuracy of 0.1 µm and a repeatability of 0.03 µm, the HEIDENHAIN-CERTO length gauge gives you the most exact measurement over a range of 60 mm that the market has to offer. The calibration chart indicates a value for linear error compensation. In combination with an ND 287 evaluation unit, the achievable accuracy improves to +/-0.05 µm.
Using the recommended CS 200 gauge stand even results in a thermally invariable measuring loop. Since the gauge stand and the HEIDENHAIN-CERTO mechanism both consist of Invar (expansion 1 ppm/K) and the scale with 2 µm signal period is manufactured from ZERODUR (expansion 0.1 ppm/K), small variations in temperature, which generally cannot be avoided, do not affect the accuracy. For high-accuracy measurements, such as stations where the finished dimensions are checked, the optional analog module can be used to compensate for deviations in the temperature of the workpiece or the entire system from the standard 20 °C.
The results of tactile measurements in this accuracy range can already be influenced by an unevenness when zeroing the length gauge. For this reason the CS 200 gauge stand fulfills special requirements regarding a flatness of 0.6 µm for the surface relevant to the measurement. For even greater requirements regarding the flatness, the ceramic plate with vacuum suction can be used. This accessory is specified for a flatness of 0.1 µm.
The electrical motor offers three gauging forces and a very constant probing force over the entire measuring range. The heat input by the operator is reduced to a minimum.
Products used in this application
| HEIDENHAIN-CERTO CT 6001 | 329352-01 |
| SG 60 M switch box for CT 6001 length gauges | 317436-02 |
| CS 200 gauge stand for CT 6001 length gauges | 221310-01 |
| Recommended accessories | |
| Ceramic suction plate | 223100-01 |
| Diaphragm pump | 754220-01 |
| ND 287 with one measuring channel | 636287-01 |
| Ethernet module for ND 287 | 654019-01 |
| Analog module for temperature compensation | 654018-01 |
| Foot switch (assignment must be adapted) | 681041-xx |
Highlights
| Thermally invariable design | INVAR mechanism, ZERODUR measuring standard |
| Accuracy | ± 0.1 µm over the entire measuring range of 60 mm ± 0.05 µm with linear error compensation from the calibration chart |
| Repeatability | 0.05 µm for measuring range of 60 mm |
HEIDENHAIN-ACANTO AT 3018
Absolute measurement together with the EIB 741 evaluation unit
In highly dynamic measuring tasks, such as on test stands, counting errors can occur in the subsequent electronics when using incremental encoders. These are often caused by excessive speeds or vibrations. The absolute length gauges of the HEIDENHAIN-ACANTO series avoid these counting errors by continuously determining the absolute position value for each request, without needing a reference run.
The diagnostics continually check the current state of the encoder and report it via the respective valuation numbers. Should there be an error in the formation of the position value, an alarm bit is transmitted via the interface. A simple check of the state of the length gauge is then possible together with the diagnostic interface of the EnDat 2.2 protocol. This alarm and diagnostic function in particular is important for securing the process capability of the system in advance. In addition, HEIDENHAIN-ACANTO length gauges feature a sliding guide system with ceramic bushing—the best solution for fulfilling the contrary demands of sturdiness and repeatability. A ball-bush guide gives better repeatability, but is more sensitive to contamination and less sturdy than a sliding guide with ceramic bushing.
In combination with the EIB 741 evaluation unit, a position value can be requested every 100 µs. Per channel the EIB 741 can typically store 250,000 data records as well as transmit approx. 1.2 MB of data in streaming mode over the Ethernet interface. The provided C++ and LabView drivers simplify integration in the machine system. As an alternative, as evaluation units you can use the ND 2100G GAGE-CHEK for up to eight encoders, or the MSE 1000 for up to 250 encoders.
ACANTO highlights
| Absolute measurement | No counting errors at high speeds or vibrations |
| Sturdy design | Ceramic plain bush guide, up to IP 67 |
| Flexibility | Pluggable assembly |
EIB 741 highlights
| Highly dynamic | One data record every 100 µs |
| High data transfer rate | Internal memory for up to 250,000 measured values per channel, as well as approx. 1.2 MB data flow rate over Ethernet in streaming mode |
Products used in this application
| HEIDENHAIN-ACANTO AT 3018 | 680985-02 |
| 3 m EnDat 2.2 cable with radial outlet | 801140-03 |
| EIB 741 evaluation unit with measured-value memory | 617574-01 |
| Recommended accessories | |
| Driver for C | |
| Driver for LabView |
HEIDENHAIN-ACANTO
Comprehensive diagnostics functionality thanks to EnDat 2.2 interface
Industry 4.0, among other factors, concerns gaining more information about the quality of each individual machining step and each quality inspection step. HEIDENHAIN ACANTO length gauges provide realistically analyzable information about the measurements. This is made possible with the bidirectional EnDat 2.2 interface. In addition to providing the position value, the interface also provides further information about the length gauge:
- Valuation numbers supply data about the momentary status of the encoder. These therefore enable continuous monitoring of the functional quality of scanning.
- Warnings and alarms enable conclusions concerning components affected by equipment failure, for example the light unit or signal amplitude.The electronic ID plate immediay displays all technical encoder parameters upon device switch-on.
The subsequent electronics can independently configure the signal period or measuring step with the transmitted information. The EnDat 2.2. interface also enables the retransfer of information to the length gauge.
Two company departments directly benefit from this added value:
- Quality Assurance can determine the quality of measurements with this diagnostics information.
- Machine Maintenance is able to avoid unnecessary idle times during production thanks to the valuation numbers.
The valuation numbers are dynamically created in a way similar to the maintenance intervals of modern cars according to their running conditions. The encoder detects if a light source is aging or contaminated, for example. The additional information can be provided by all HEIDENHAIN evaluation electronics, and supplementary software or hardware modules are not needed. The following evaluation units are available for the purpose:
- the ND 287 for single or dual-axis measuring tasks
- the ND 2100G GAGE-CHEK with up to eight measuring channels
- the MSE 1000 with up to 250 measuring channels
These evaluation electronics support the EnDat 2.2 interface and ensure all applications benefit from this diagnosis functionality. The MSE 1000 also features additional diagnostics for analog interfaces, e.g. for testing the signal amplitude.
The absolute scanning of HEIDENHAIN ACANTO length gauges immediay delivers a measured value without the need for a reference run. The length gauges with a measuring range of 12 mm or 30 mm repeatedly measure a new absolute value. Measuring errors from excessive plunger speeds, caused by bounce for example, belong to the past. Today’s HEIDENHAIN ACANTO length gauges are equipped now for future requirements. Evaluating the quality of measurements and the status information of the device provides added value for various departments in the company and helps to design production with greater efficiency.
ACANTO highlights
| Diagnosis | Momentary operating status of the length gauge |
| Absolute measuring principle | New position value is repeatedly determined, no counting errors |
| Degree of protection | Up to IP67 |
Products used in this application
| HEIDENHAIN ACANTO AT 1217 | 680982-01 |
| HEIDENHAIN ACANTO AT 1218 | 680983-01 |
| Recommended accessories | |
| Cable for encoder connection | 801142-01 |
| ND 287 with one measuring channel | 636287-01 |
| MSE 1114 basic module, EnDat 2.2 | 747499-01 |
| MSE 1201 power supply | 747501-01 |
HEIDENHAIN-SPECTO ST 1200 and ST 3000
The solution for multipoint inspection apparatuses with station widths of only 15 mm
Multipoint measuring stations are becoming ever more important in production. Typical applications are the simultaneous detection of several measured values or combining single measuring steps during machining.
Length gauges from the HEIDENHAIN SPECTO series feature station widths of less than 15 mm, enabling several length gauges to be positioned in tight spaces. To keep space requirements in the system low, cables can be either axially or radially connected. The length gauge is also ideal for in-process measurements thanks to a protection class to IP67.
Accuracy of ±1 µm is ensured over measuring strokes of 12 mm (with the ST 1200) or 30 mm (with the ST 3000). The short-range accuracy (measurement error in a measuring range of 200 µm) is typically less than 0.3 µm, and repeatability has the same low value. These values are possible among other factors due to the highly precise ball guide, designed for a life of more than 60 million measuring cycles.
HEIDENHAIN offers a range of evaluation electronics for processing the measured values on multipoint inspection apparatuses:
- The ND 2100G GAGE-CHEK with up to eight measuring channels enables values to be displayed and directly evaluated. The scope of the software and hardware enables the saving of processes and responses and the display of PLC functionality with applications.
- The MSE 1000 is a modular evaluation unit with up to 250 measuring channels. In addition to channels for measured values, analog signals with ±10 V can also be imported for temperature sensors for example. Four floating inputs and outputs enable actions prior to, during and after measuring. The supply of pneumatic length gauges can also be switched on and off via a compressed air module.
- The EIB 740 with four measuring channels is an ideal evaluation unit for applications requiring high dynamic measured-value acquisition. The device enables data interrogation every 100 µs.
HEIDENHAIN SPECTO length gauges are therefore the ideal solution for multipoint inspection apparatuses. Combining them with the various evaluation electronics enables perfect configurations according to the specific application.
SPECTO highlights
| High degree of protection | Up to IP67 |
| Ball-bush guided plunger | highest accuracy in the measuring loop |
| Compact dimensions | unit diameter 13 mm |
Evaluation electronics highlights
| Modular design | up to 250 channels |
| High dynamics | one data record every 10 µs |
Products used in this application
| SPECTO ST 1288 with 15-pin connector and axial cable outlet | 383987-01 |
| ND 2104G GAGE-CHEK, 4-channel with 220 V connection | 665408-02 |
| MSE 1184 basic module 1 VPP | 747500-01 |
| MSE 1201 power supply | 747501-01 |
| EIB 741 evaluation unit with measured-value memory | 617574-04 |
HEIDENHAIN-SPECTO ST 1200 and ST 3000
The solution for multipoint inspection apparatuses with station widths of only 15 mm
Multipoint measuring stations are becoming ever more important in production. Typical applications are the simultaneous detection of several measured values or combining single measuring steps during machining.
Length gauges from the HEIDENHAIN SPECTO series feature station widths of less than 15 mm, enabling several length gauges to be positioned in tight spaces. To keep space requirements in the system low, cables can be either axially or radially connected. The length gauge is also ideal for in-process measurements thanks to a protection class to IP67.
Accuracy of ±1 µm is ensured over measuring strokes of 12 mm (with the ST 1200) or 30 mm (with the ST 3000). The short-range accuracy (measurement error in a measuring range of 200 µm) is typically less than 0.3 µm, and repeatability has the same low value. These values are possible among other factors due to the highly precise ball guide, designed for a life of more than 60 million measuring cycles.
HEIDENHAIN offers a range of evaluation electronics for processing the measured values on multipoint inspection apparatuses:
- The ND 2100G GAGE-CHEK with up to eight measuring channels enables values to be displayed and directly evaluated. The scope of the software and hardware enables the saving of processes and responses and the display of PLC functionality with applications.
- The MSE 1000 is a modular evaluation unit with up to 250 measuring channels. In addition to channels for measured values, analog signals with ±10 V can also be imported for temperature sensors for example. Four floating inputs and outputs enable actions prior to, during and after measuring. The supply of pneumatic length gauges can also be switched on and off via a compressed air module.
- The EIB 740 with four measuring channels is an ideal evaluation unit for applications requiring high dynamic measured-value acquisition. The device enables data interrogation every 100 µs.
HEIDENHAIN SPECTO length gauges are therefore the ideal solution for multipoint inspection apparatuses. Combining them with the various evaluation electronics enables perfect configurations according to the specific application.
SPECTO highlights
| High degree of protection | Up to IP67 |
| Ball-bush guided plunger | highest accuracy in the measuring loop |
| Compact dimensions | unit diameter 13 mm |
Evaluation electronics highlights
| Modular design | up to 250 channels |
| High dynamics | one data record every 10 µs |
Products used in this application
| SPECTO ST 1288 with 15-pin connector and axial cable outlet | 383987-01 |
| ND 2104G GAGE-CHEK, 4-channel with 220 V connection | 665408-02 |
| MSE 1184 basic module 1 VPP | 747500-01 |
| MSE 1201 power supply | 747501-01 |
| EIB 741 evaluation unit with measured-value memory | 617574-04主要走 |
二、的型號及ID號：
| Part name | Part number ID | |
|---|---|---|
| MT 12W 02S09 04 ~11µApp 01 .. 1.50 01 5.5mm 64 AF 10.000 GF 01 1.0 | 231011-03 | |
| MT 25W 02S09 04 ~11µApp 01 .. 1.50 01 5.5mm 64 AF 10.000 GF 01 1.0 | 231013-03 | |
| MT 12P 02S09 04 ~11µApp 01 .. 1.50 01 5.5mm 50 ES 10.000 GF 03 0.5 | 232714-02 | |
| MT 12P 16S15 2D ~11µApp 01 .. 1.50 01 5.5mm 50 ES 10.000 GF 03 0.5 | 232714-03 | |
| MT 25P 02S09 04 ~11µApp 01 .. 1.50 01 5.5mm 50 ES 10.000 GF 03 0.5 | 232715-03 | |
| MT 25P 16S15 2D ~11µApp 01 .. 1.50 01 5.5mm 50 ES 10.000 GF 03 0.5 | 232715-04 | |
| MT 12 02S09 04 ~11µApp 01 0002 1.50 01 5.5mm 50 ES 10.000 GF 01 0.5 | 243602-01 | |
| MT 12 02S09 04 ~11µApp 01 .. 1.50 01 5.5mm 50 ES 10.000 GF 01 0.5 | 243602-06 | |
| MT 12B 02S09 04 ~11µApp 01 .. 1.50 01 5.5mm 50 ES 10.000 KF 01 0.5 | 243602-16 | |
| MT 12B 02S09 04 ~11µApp 01 .. 1.50 01 5.5mm 50 ES 10.000 KF 02 0.5 | 243602-17 | |
| MT 25 02S09 04 ~11µApp 01 0002 1.50 01 5.5mm 50 ES 10.000 GF 01 0.5 | 243603-01 | |
| MT 25 02S09 04 ~11µApp 01 .. 1.50 01 5.5mm 50 ES 10.000 GF 01 0.5 | 243603-07 | |
| MT 25B 02S09 04 ~11µApp 01 .. 1.50 01 5.5mm 50 ES 10.000 KF 01 0.5 | 243603-16 | |
| MT 25B 02S09 04 ~11µApp 01 .. 1.50 01 5.5mm 50 ES 10.000 KF 02 0.5 | 243603-17 | |
| CT 2501 02S09 04 ~11µApp 01 .. 1.50 01 1.50 1.7mm 50 E2 2.000 06 | 325392-03 | |
| CT 2502 02S09 04 ~11µApp 01 .. 1.50 01 0.00 1.7mm 50 E2 2.000 02 | 325392-04 | |
| MT 1201 02S09 04 ~11µApp 01 .. 1.50 01 1.7mm 50 ES 2.000 KF 01 0.2 | 329350-02 | |
| MT 1201 02S09 04 ~11µApp 01 .. 1.50 01 1.7mm 50 ES 2.000 KF 02 0.2 | 329350-03 | |
| MT 2501 02S09 04 ~11µApp 01 .. 1.50 01 1.7mm 50 ES 2.000 KF 01 0.2 | 329351-02 | |
| MT 2501 02S09 04 ~11µApp 01 .. 1.50 01 1.7mm 50 ES 2.000 KF 02 0.2 | 329351-03 | |
| CT 6001 02S09 04 ~11µApp 01 .. 1.50 01 1.50 1.7mm 50 AF 2.000 06 | 329352-01 | |
| CT 6002 02S09 04 ~11µApp 01 .. 1.50 01 0.00 1.7mm 50 AF 2.000 02 | 329352-02 | |
| MT 1281 02S12 03 ~1Vpp 01 .. 1.50 01 1.7mm 50 ES 2.000 KF 01 0.2 | 331314-02 | |
| MT 1281 02S12 03 ~1Vpp 01 .. 1.50 01 1.7mm 50 ES 2.000 KF 02 0.2 | 331314-03 |
| Part name | Part number ID | |
|---|---|---|
| MT 1271 93S15 0V TTLx5 100.00 OT 01 .. 1.50 01 1.7mm 90 50 2.000 01 | 331666-01 | |
| MT 1271 93S15 0V TTLx5 100.00 OT 01 .. 1.50 01 1.7mm 90 50 2.000 02 | 331666-02 | |
| MT 1271 93S15 0V TTLx5 200.00 MT 01 .. 1.50 01 1.7mm 90 50 2.000 01 | 331666-05 | |
| MT 1271 93S15 0V TTLx10 50.00 OT 01 .. 1.50 01 1.7mm 90 50 2.000 01 | 331666-06 | |
| MT 1271 93S15 0V TTLx10 100.00 OT 01 .. 1.50 01 1.7mm 90 50 2.000 01 | 331666-51 | |
| MT 1271 93S15 0V TTLx10 100.00 OT 01 .. 1.50 01 1.7mm 90 50 2.000 02 | 331666-52 | |
| MT 1271 93S15 0V TTLx5 50.00 OT 01 .. 1.50 01 1.7mm 90 50 2.000 01 | 331666-S1 | |
| MT 2571 93S15 0V TTLx5 100.00 OT 01 .. 1.50 01 1.7mm 90 50 2.000 01 | 331667-01 | |
| MT 2571 93S15 0V TTLx5 100.00 OT 01 .. 1.50 01 1.7mm 90 50 2.000 02 | 331667-02 | |
| MT 2571 93S15 0V TTLx5 200.00 OT 01 .. 1.50 01 1.7mm 90 50 2.000 01 | 331667-03 | |
| MT 2571 93S15 0V TTLx5 50.00 OT 01 .. 1.50 01 1.7mm 90 50 2.000 01 | 331667-05 | |
| MT 2571 93S15 0V TTLx10 25.00 OT 01 .. 1.50 01 1.7mm 90 50 2.000 01 | 331667-07 | |
| MT 2571 93S15 0V TTLx10 100.00 OT 01 .. 1.50 01 1.7mm 90 50 2.000 01 | 331667-51 | |
| MT 2571 93S15 0V TTLx10 100.00 OT 01 .. 1.50 01 1.7mm 90 50 2.000 02 | 331667-52 | |
| MT 2581 02S12 03 ~1Vpp 01 .. 1.50 01 1.7mm 50 ES 2.000 KF 01 0.2 | 332104-02 | |
| MT 2581 02S12 03 ~1Vpp 01 .. 1.50 01 1.7mm 50 ES 2.000 KF 02 0.2 | 332104-03 | |
| MT 60M 02S09 04 ~11µApp 01 .. 1.50 01 1.50 1.7mm 50 AF 10.000 06 | 359341-01 | |
| MT 60K 02S09 04 ~11µApp 01 .. 1.50 01 0.00 1.7mm 50 AF 10.000 02 | 359341-02 | |
| MT 60K 02S09 04 ~11µApp 01 .. 1.50 01 0.00 30mm 50 AF 10.000 02 | 359341-04 | |
| MT 1281 93S15 0V ~1Vpp 01 .. 1.50 01 1.7mm 50 ES 2.000 KF 01 0.2 | 359355-02 | |
| MT 1281CF 93S15 0V ~1Vpp 01 .. 1.50 01 1.7mm 50 ES 2.000 KF 02 0.2 | 359355-03 | |
| MT 1281ZF 93S15 0V ~1Vpp 01 0018 1.50 01 1.7mm 50 ES 2.000 KF 01 0.2 | 359355-10 | |
| MT 1281WF 93S15 0V ~1Vpp 01 0024 1.50 01 1.7mm 50 ES 2.000 KF 01 0.2 | 359355-11 | |
| MT 101M 02S09 04 ~11µApp 01 .. 1.50 01 1.50 10mm 50 AF 10.000 06 | 361139-01 |
| Part name | Part number ID | |
|---|---|---|
| MT 101K 02S09 04 ~11µApp 01 .. 1.50 01 0.00 10mm 50 AF 10.000 02 | 361139-02 | |
| MT 2581 93S15 0V ~1Vpp 01 .. 1.50 01 1.7mm 50 ES 2.000 KF 01 0.2 | 363409-02 | |
| MT 2581 93S15 0V ~1Vpp 01 .. 1.50 01 1.7mm 50 ES 2.000 KF 02 0.2 | 363409-03 | |
| MT 2587 02S12 03 ~1Vpp 01 .. 1.50 01 1.7mm 64 ES 2.000 KF 03 0.2 | 372495-01 | |
| ST 3008 02S09 7K A ~11µApp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 375129-01 | |
| ST 3008 02S09 7K R ~11µApp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 375130-01 | |
| ST 3088 02S12 7K A ~1Vpp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 375131-01 | |
| ST 3088 02S12 7K R ~1Vpp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 375132-01 | |
| ST 3078 93S15 7K A TTLx5 100.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 375133-01 | |
| ST 3078 93S15 7K A TTLx10 100.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 375133-02 | |
| ST 3078 93S15 7K A TTLx5 50.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 375133-03 | |
| ST 3078 93S15 7K A TTLx10 25.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 375133-04 | |
| ST 3078 93S15 7K R TTLx5 100.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 375134-01 | |
| ST 3078 93S15 7K R TTLx10 100.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 375134-02 | |
| ST 3078 93S15 7K R TTLx10 50.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 375134-03 | |
| ST 3078 93S15 7K R TTLx5 50.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 375134-04 | |
| ST 3078 93S15 7K R TTLx10 25.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 375134-05 | |
| ST 3078 93S15 7K R TTLx5 200.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 375134-06 | |
| ST 3007 02S09 7K A ~11µApp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 375135-01 | |
| ST 3087 02S12 7K A ~1Vpp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 375136-01 | |
| ST 3077 93S15 7K A TTLx5 100.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 375137-01 | |
| ST 3077 93S15 7K A TTLx10 100.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 375137-02 | |
| MT 1287 02S12 03 ~1Vpp 01 .. 1.50 01 1.7mm 64 ES 2.000 KF 03 0.2 | 375162-01 | |
| MT 1287 93S15 0V ~1Vpp 01 .. 1.50 01 1.7mm 64 ES 2.000 KF 03 0.2 | 376990-01 |
| Part name | Part number ID | |
|---|---|---|
| MT 2587 93S15 0V ~1Vpp 01 .. 1.50 01 1.7mm 50 ES 2.000 KF 03 0.2 | 376992-01 | |
| ST 1278 93S15 7K R TTLx10 25.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 383963-01 | |
| ST 1278 93S15 7K R TTLx5 100.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 383963-02 | |
| ST 1278 93S15 7K R TTLx10 100.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 383963-03 | |
| ST 1278 93S15 7K R TTLx5 50.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 383963-05 | |
| ST 1278 93S15 7K R TTLx10 50.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 383963-08 | |
| ST 1278 93S15 7K R TTLx10 25.00 OT 01 .. 01 5mm 90 1.50 19 67 1.0 | 383963-21 | |
| ST 1278 93S15 7K R TTLx5 100.00 OT 01 .. 01 5mm 90 1.50 19 67 1.0 | 383963-22 | |
| ST 1278 93S15 7K R TTLx10 100.00 OT 01 .. 01 5mm 90 1.50 19 67 1.0 | 383963-23 | |
| ST 1278 93S15 7K R TTLx5 50.00 OT 01 .. 01 5mm 90 1.50 19 67 1.0 | 383963-25 | |
| ST 1278 93S15 7K A TTLx10 25.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 383965-01 | |
| ST 1278 93S15 7K A TTLx5 100.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 383965-02 | |
| ST 1278 93S15 7K A TTLx10 100.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 383965-03 | |
| ST 1278 93S15 7K A TTLx5 50.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 383965-04 | |
| ST 1278 93S15 7K A TTLx10 50.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 383965-05 | |
| ST 1278 93S15 7K A TTLx5 200.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 383965-06 | |
| ST 1278 93S15 7K A TTLx10 25.00 OT 01 .. 01 5mm 90 1.50 19 67 1.0 | 383965-21 | |
| ST 1278 93S15 7K A TTLx5 100.00 OT 01 .. 01 5mm 90 1.50 19 67 1.0 | 383965-22 | |
| ST 1278 93S15 7K A TTLx10 100.00 OT 01 .. 01 5mm 90 1.50 19 67 1.0 | 383965-23 | |
| ST 1207 02S09 7K A ~11µApp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 383972-01 | |
| ST 1277 93S15 7K A TTLx5 100.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 383973-01 | |
| ST 1277 93S15 7K A TTLx10 100.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 383973-02 | |
| ST 1287 02S12 7K A ~1Vpp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 383975-01 | |
| ST 1208 02S09 7K A ~11µApp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 383976-01 |
| Part name | Part number ID | |
|---|---|---|
| ST 1208 02S09 7K R ~11µApp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 383977-01 | |
| ST 1288 02S12 7K A ~1Vpp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 383978-01 | |
| ST 1288 02S12 7K A ~1Vpp 0.00 .. 01 .. 01 5mm 360 1.50 19 67 1.0 | 383978-21 | |
| ST 1288 02S12 7K R ~1Vpp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 383979-01 | |
| ST 1288 02S12 7K R ~1Vpp 0.00 .. 01 .. 01 5mm 360 1.50 19 67 1.0 | 383979-21 | |
| ST 1288 16S15 7K A ~1Vpp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 383987-01 | |
| ST 1288 16S15 7K A ~1Vpp 0.00 .. 01 0001 01 5mm 360 1.50 19 50 1.0 | 383987-03 | |
| ST 1288 16S15 7K A ~1Vpp 0.00 .. 01 0023 01 5mm 360 1.50 19 50 1.0 | 383987-04 | |
| ST 1288 16S15 7K A ~1Vpp 0.00 .. 01 .. 01 5mm 360 1.50 19 67 1.0 | 383987-21 | |
| ST 1288 16S15 7K R ~1Vpp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 383989-01 | |
| ST 1288 16S15 7K R ~1Vpp 0.00 .. 01 .. 01 5mm 360 1.50 19 67 1.0 | 383989-21 | |
| ST 1287 16S15 7K A ~1Vpp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 384005-01 | |
| ST 3087 16S15 7K A ~1Vpp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 384006-01 | |
| ST 3088 16S15 7K A ~1Vpp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 384007-01 | |
| ST 3088 16S15 7K R ~1Vpp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 384008-01 | |
| ST 1207 02S09 7K R ~11µApp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 386912-01 | |
| ST 3007 02S09 7K R ~11µApp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 388307-01 | |
| ST 1277 93S15 7K R TTLx10 100.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 511395-01 | |
| ST 1277 93S15 7K R TTLx5 100.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 511395-03 | |
| ST 1287 02S12 7K R ~1Vpp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 511396-01 | |
| ST 3077 93S15 7K R TTLx5 100.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 511398-01 | |
| ST 3077 93S15 7K R TTLx10 100.00 OT 01 .. 01 5mm 90 1.50 19 64 1.0 | 511398-02 | |
| ST 3087 02S12 7K R ~1Vpp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 511399-01 | |
| ST 3087 16S15 7K R ~1Vpp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 511400-01 |
| Part name | Part number ID | |
|---|---|---|
| ST 1287 16S15 7K R ~1Vpp 0.00 .. 01 .. 01 5mm 360 1.50 19 64 1.0 | 511401-01 | |
| CT 2501 93S15 2D ~11µApp 01 .. 1.50 01 1.50 1.7mm 50 E2 2.000 06 | 653225-01 | |
| CT 2502 93S15 2D ~11µApp 01 .. 1.50 01 0.00 1.7mm 50 E2 2.000 02 | 653228-01 | |
| CT 6001 93S15 2D ~11µApp 01 .. 1.50 01 1.50 1.7mm 50 AF 2.000 06 | 653229-01 | |
| CT 6002 93S15 2D ~11µApp 01 .. 1.50 01 0.00 1.7mm 50 AF 2.000 02 | 653230-01 | |
| MT 101M 16S15 2D ~11µApp 01 .. 1.50 01 1.50 10mm 50 AF 10.000 06 | 653246-01 | |
| MT 101K 16S15 2D ~11µApp 01 .. 1.50 01 0.00 10mm 50 AF 10.000 02 | 653248-01 | |
| MT 60M 16S15 2D ~11µApp 01 .. 1.50 01 1.50 1.7mm 50 AF 10.000 06 | 653249-01 | |
| MT 60K 16S15 2D ~11µApp 01 .. 1.50 01 0.00 1.7mm 50 AF 10.000 02 | 653250-01 | |
| MT 60K 16S15 2D ~11µApp 01 .. 1.50 01 0.00 30mm 50 AF 10.000 02 | 653251-01 | |
| MT 12 16S15 2D ~11µApp 01 0002 1.50 01 5.5mm 50 ES 10.000 GF 01 0.5 | 663948-01 | |
| MT 25 16S15 2D ~11µApp 01 0002 1.50 01 5.5mm 50 ES 10.000 GF 01 0.5 | 663955-01 | |
| MT 25 16S15 2D ~11µApp 01 .. 1.50 01 5.5mm 50 ES 10.000 GF 01 0.5 | 663955-07 | |
| AT 1217 3YS08 C4 EnDat22 23 01 .. 01 64 GF 03 2.0 12 | 680982-03 | |
| AT 1218 3YS08 C4 EnDat22 23 01 .. 01 67 GF 01 2.0 12 | 680983-03 | |
| AT 3017 3YS08 C4 EnDat22 368 01 .. 01 A1 GF 03 2.0 30 | 680984-02 | |
| AT 3018 3YS08 C4 EnDat22 368 01 .. 01 67 GF 01 2.0 30 | 680985-02 |
三、服務網點：
北京、上海、天津、重慶、河北、山西、陜西、山東、河南、遼寧、吉林、黑龍江、江蘇、浙江、安徽、江西、福建、湖北、湖南、四川、貴州、云南、廣東、海南、甘肅、青海、中國臺灣、內蒙古、新疆、西藏、廣西、寧夏、石家莊市、唐山市、秦皇島市、邯鄲市、邢臺市、保定市、張家口市、承德市、滄州市、廊坊市、衡水市、辛集市、藁城市、晉州市、新樂市、鹿泉市、遵化市、遷安市、武安市、南宮市、沙河市、涿州市、定州市、安國市、*碑店市、泊頭市、任丘市、黃驊市、河間市、霸州市、三河市、冀州市、深州市、太原、大同、朔州、陽泉、長治、晉城、忻州、晉中、臨汾、運城、呂梁、古交、潞城、*平、原平、介休、侯馬、霍州、永濟、河津、孝義、汾陽、西安市、銅川市、寶雞市、咸陽市、渭南市、延安市、漢中市、榆林市、安康市、商洛、興平市、韓城市、華陰市、濟南市、青島市、淄博市、棗莊市、東營市、煙臺市、濰坊市、濟寧市、泰安市、威海市、日照市、萊蕪市、臨沂市、德州市、聊城市、濱州市、菏澤市、章丘市、膠南市、膠州市、平度市、萊西市、即墨市、滕州市、龍口市、萊陽市、萊州市、招遠市、蓬萊市、棲霞市、海陽市、青州市、諸城市、壽光市、安丘市、*密市、昌邑市、曲阜市、兗州市、鄒城市、新泰市、肥城市、乳山市、文登市、榮成市、樂陵市、禹城市、臨清市、鄭州市、開封市、洛陽市、平頂山市、安陽市、鶴壁市、新鄉市、焦作市、濮陽市、許昌市、漯河市、三門峽市、南陽市、商丘市、信陽市、周口市、駐馬店市、鞏義市、新鄭市、新密市、登封市、滎陽市、中牟縣、偃師市、汝州市、舞鋼市、林州市、衛輝市、輝縣市、沁陽市、孟州市、禹州市、長葛市、義馬市、靈寶市、鄧州市、永城市、項城市、濟源市、沈陽市、大連市、鞍山市、撫順市、本溪市、丹東市、錦州市、營口市、阜新市、遼陽市、盤錦市、鐵嶺市、朝陽市、葫蘆島市、新民市、瓦房店市、普蘭店市、莊河市、海城市、東港市、鳳城市、凌海市、北鎮市、大石橋市、蓋州市、燈塔市、調兵山市、開原市、凌源市、北票市、興城市、新民市、瓦房店市、普蘭店市、莊河市、海城市、東港市、鳳城市、凌海市、北鎮市、大石橋市、蓋州市、燈塔市、調兵山市、開原市、凌源市、北票市、興城市、長春市、吉林市、四平市、遼源市、通化市、白山市、松原市、白城市、延邊朝鮮族自治州、九臺市、榆樹市、德惠市、舒蘭市、樺甸市、蛟河市、磐石市、公主嶺市、雙遼市、梅河口市、集安市、臨江市、大安市、洮南市、延吉市、圖們市、敦化市、龍井市、琿春市、和龍市、哈爾濱市、齊齊哈爾市、鶴崗市、雙鴨山市、雞西市、大慶市、伊春市、牡丹江市、佳木斯市、七臺河市、黑河市、綏化市、尚志市、雙城市、五常市、訥河市、密山市、虎林市、鐵力市、綏芬河市、寧安市、海林市、穆棱市、同江市、富錦市、北安市、五大連池市、安達市、肇東市、海倫市、南京市、無錫市、徐州市、常州市、蘇州市、南通市、連云港市、淮安市、鹽城市、揚州市、鎮江市、泰州市、宿遷市、江陰市、宜興市、邳州市、新沂市、金壇市、溧陽市、常熟市、張家港市、太倉市、昆山市、吳江市、如皋市、通州市、海門市、啟東市、東臺市、大豐市、*郵市、江都市、儀征市、丹陽市、揚中市、句容市、泰興市、姜堰市、靖江市、興化市、杭州市、寧波市、溫州市、嘉興市、湖州市、紹興市、金華市、衢州市、舟山市、臺州市、麗水市、建德市、富陽市、臨安市、余姚市、慈溪市、奉化市、瑞安市、樂清市、海寧市、平湖市、桐鄉市、諸暨市、上虞市、嵊州市、蘭溪市、義烏市、東陽市、永康市、江山市、臨海市、溫嶺市、龍泉市、合肥市、蕪湖市、蚌埠市、淮南市、馬鞍山市、淮北市、銅陵市、安慶市、黃山市、滁州市、阜陽市、宿州市、巢湖市、六安市、亳州市、池州市、宣城市、桐城市、天長市、明光市、界*市、寧國市、南昌市、景德鎮市、萍鄉市、九江市、新余市、鷹潭市、贛州市、吉安市、宜春市、撫州市、上饒市、樂平市、瑞昌市、貴溪市、瑞金市、南康市、井岡山市、豐城市、樟樹市、*安市、德興市、福州市、廈門市、莆田市、三明市、泉州市、漳州市、南平市、龍巖市、寧德市、福清市、長樂市、永安市、石獅市、晉江市、南安市、龍海市、邵武市、武夷山、建甌市、漳平市、建陽市、福安市、福鼎市、武漢市、黃石市、十堰市、荊州市、宜昌市、襄樊市、鄂州市、荊門市、孝感市、黃岡市、咸寧市、隨州市、大冶市、丹江口市、洪湖市、石*市、松滋市、宜都市、當陽市、枝江市、老河口市、棗陽市、宜城市、鐘祥市、應城市、安陸市、漢川市、麻城市、武穴市、赤壁市、廣水市、仙桃市、天門市、潛江市、恩施市、利川市、恩施、長沙市、株洲市、湘潭市、衡陽市、邵陽市、岳陽市、常德市、張家界市、益陽市、郴州市、永州市、懷化市、婁底市、瀏陽市、醴陵市、湘鄉市、韶山市、耒陽市、常寧市、武岡市、臨湘市、汨羅市、津市市、沅江市、資興市、洪江市、冷水江市、漣源市、吉*市、成都市、自貢市、攀枝花市、瀘州市、德陽市、綿陽市、廣元市、遂寧市、內江市、樂山市、南充市、眉山市、宜賓市、廣安市、達州市、雅安市、巴中市、資陽市。 3個自治州：阿壩藏族羌族自治州、甘孜藏族自治州、涼山彝族自治州、都江堰市、彭州市、邛崍市、崇州市、廣漢市、什邡市、綿竹市、江油市、峨眉山市、閬中市、華鎣市、萬源市、簡陽市、西昌市、貴陽市、六盤水市、遵義市、安順市銅仁地區、畢節地區、清鎮市、赤水市、仁懷市、銅仁市、畢節市、興義市、凱里市、都勻市、福泉市、黔西、黔東、昆明市、曲靖市、玉溪市、保山市、昭通市、麗江市、普洱市、臨滄市、*壯族苗族自治州、紅河哈尼族彝族自治州、西雙版納傣族自治州、楚雄彝族自治州、大理白族自治州、德宏傣族景頗族自治州、怒江僳僳族自治州、迪慶藏族自治州、安寧市、宣威市、個舊市、開遠市、景洪市、楚雄市、大理市、潞西市、瑞麗市、廣州市、深圳市、珠海市、汕頭市、韶關市、佛山市、江門市、湛江市、茂名市、肇慶市、惠州市、梅州市、汕尾市、河源市、陽江市、清遠市、東莞市、中山市、潮州市、揭陽市、云浮市、廣州市、深圳市、珠海市、汕頭市、韶關市、佛山市、江門市、湛江市、茂名市、肇慶市、惠州市、梅州市、汕尾市、河源市、陽江市、清遠市、東莞市、中山市、潮州市、揭陽市、云浮市、?？谑?、三亞市、文昌市、瓊海市、萬寧市、五指山市、東方市、儋州市、蘭州市、金昌市、白銀市、天水市、嘉峪關市、武威市、張掖市、平?jīng)鍪?、酒泉市、慶陽市、定西市、隴南市、臨夏回族自治州、甘南藏族自治州、玉門市、敦煌市、臨夏市、合作市、西寧市、海東、呼和浩特市、包頭市、烏海市、赤峰市、通遼市、鄂爾多斯市、呼倫貝爾市、巴彥淖爾市、烏蘭察布市、錫林郭勒盟、興安盟、阿拉善盟、霍林郭勒市、滿洲里市、牙克石市、扎蘭屯市、根河市、額爾古納市、豐鎮市、錫林浩特市、二連浩特市、烏蘭浩特市、阿爾山市、烏魯木齊市、克拉瑪依市、吐魯番地區、哈密地區、和田地區、阿克蘇地區、喀什地區、塔城地區、阿勒泰地區、克孜勒蘇柯爾克孜自治州、巴音郭楞蒙古自治州、昌吉回族自治州、博爾塔拉蒙古自治州、伊犁哈薩克自治州、石河子市、阿拉爾市、圖木舒克市、五家渠市、吐魯番市、哈密市、和田市、阿克蘇市、喀什市、阿圖什市、庫爾勒市、昌吉市、阜康市、米泉市、博樂市、伊寧市、奎屯市、塔城市、烏蘇市、阿勒泰市、拉薩市、南寧市、柳州市、桂林市、梧州市、北海市、防城港市、欽州市、貴港市、玉林市、百色市、賀州市、河池市、來賓市、崇左市、岑溪市、東興市、桂平市、北流市、宜州市、合山市、憑祥市、銀川市、石嘴山市、吳忠市、固原市、中衛市、靈武市、青銅峽市、茶陵、攸縣。
| 如果你對HEIDENHAIN海德漢長度計價格及維修感興趣，想了解更詳細的產品信息，填寫下表直接與廠家聯系： |